Bar Snake only accepts PayPal payments

Customers Please Note:

Installation tip for SOLID BARSNAKES:
If the handlebars appear to be smaller than normal on the inside diameter, or handlebars appear to have sharper than normal bends you may wish to pre-heat the Barsnake in hot water to allow easier installation!

- Carter Powell

C.E.O. Barsnake LLC

ORDERING A BARSNAKE

To order a barsnake, please contact us at: linda@barsnake.com or contact us at: 541-416-1120

Bar Snake Model ST-1. Fits most standard steel non high rise bars of 7/8" outside diameter. Most steel bars should be about 23/32" inside diameter and 40" long. If possible before placing your order, please check the wall thickness of your handlebar with a caliper. If you do not have a caliper available use a small ruler. If the wall thickness of your handlebar is about .1150 or 1/8" thick then the ST-1 will be the correct Barsnake for your handlebar. If it is thinner than this then the ST-2 would be a better fit.

Bar Snake Model ST-2. The ST-2 is slightly larger than the ST-1 and is better suited to 7/8" O.D. handlebars that have a wall thickness of around .700 or 5/64" in thickness. Either the ST-1 or the ST-2 will work in a 7/8" O.D. bar but the more accurate the fit, the better the vibration absorption

Bar Snake Model AL-2. Fits most aluminum crossbrace handlebars with 7/8" outside diameter, internal diameter of 9/16 and 40" long.

Bar Snake Model HD-3 Fits most 1-inch external diameter handlebars (Harley) with 7/8-inch internal handlebar diameter. Excluding ape-hangers/buckhorn/multi-curved bars, etc, and up to 40-inches long. **Special Note to Harley owners:** Check thoroughly for dimples and other obstructions that may be in your handlebars before purchase. If possible before placing your order, please check the wall thickness of your handlebar with a caliper. If you do not have a caliper available use a small ruler. If the wall thickness of your handlebar is about .1150 or 1/8" thick, then the HD-3 will be the correct Barsnake for your handlebar. If it is thinner than this then the HD-4 would be a better fit.

Bar Snake Model HD-4 The HD-4 is slightly larger than the HD-3 and is better suited to 1.00" O.D. handlebars that have a wall thickness of around .700 or 5/64" in thickness. Either the HD-3 or the HD-4 will work in a 1.00" O.D. bar but the more accurate the fit, the better the vibration absorption.

Barsnake Model HD-3L HD-3L is a longer version of the HD-3. It is 50" in length and is designed for one inch O.D. handlebars as found on most metric cruisers. Not for buckhorn or dimpled bars

Bar Snake Model LV-4. Liquid Bar Snake for handle bars with kinks, bends, or wires and cables running through them. The Liquid Bar Snake can be poured into tubular handlebars and sets in four hours. The Liquid Bar Snake can be used in all tubular handlebars, but is especially intended for pro-taper handlebars, multi-curved handlebars, such as buckhorns or ape-hangers, or handlebars which have cables running through them. In short, wherever a standard solid Bar Snake cannot be easily used. Model LV-4 contains enough fluid to fill a 7/8-inch external diameter handlebar up to 40 inches long.

Price: $49.95

Bar Snake Model LV-5. Same as LV-4, but more fluid for 1-inch external handlebar diameter up to 52-inches long.

Price: $59.95

For .International Orders, please contact: linda@barsnake.com

Any Snakespit ordered with a Barsnake will receive free shipping on the Snakespit

Or call 1-541-416-1120

Snake Spit 1 Quart Snakespit is the strongest and safest motorcycle cleaner / degreaser on the market. Safe to use on all motorcycle surfaces!

Snake Spit 1 Gallon Snakespit is the strongest and safest motorcycle cleaner / degreaser on the market. Safe to use on all motorcycle surfaces!